SECOND HAND COMPLETE DILO DILO NONWOVEN NEEDLE PUNCHING PLANT
SECOND HAND COMPLETE DILO DILO NONWOVEN NEEDLE PUNCHING PLANT
Description
Secondhand used - unused ,reconditioned for sale ,resale ,Auction ,liquidation Available Complete DILO DILO Gmbh Non Woven Needle Punched Plant 5 METER in good condition Late 1990s renewed 2010..,
coming from an AUTOMOTIVE application based factory making Velour Fabrics & others in GSM range 200-600 ….
Scope of Supply & Tech Details :
FIBRE BLENDING
Temafa 25m Conveyor (fits 8 bales end to end)
Temafa Single pin sheet blending hopper with Volumetric feed
Temafa Fearnaught Fibre opening, Type RD02
Oiling,Temafa Metal detection Fan
Feed to either:
Temafa Mix master blending bin with conveyor floor (approx. 20m x 4m) – Type MM20 / 2
Or
Temafa Small Blending bin (5m x 5m)
Or
2 x Temafa blending bins each approx. 2500kgs with single bin Temafa emptier
Temafa fabric condenser and feed tower (10m high),Trutzschler FD-S fine fibre opening (2005)
CARDING
Trutzschler volumetric card hopper feed
2.5m FOR multi-cylinder nonwoven card with double doffer ,
Production rate up to 500kgs per hour
Card uses a Serel servolap system to control the web weight pre card.
CROSS LAPPER
Autefa Cross Lapper (Type 190 73) with 2.5m inlet and 5.0m max lay width (1999)
There is a PROFILE attachment..
NEEDLEPUNCH
Sound proof cabinet
5.0M DILO PRE NEEDLE (Type CBF T 50, 1999,)
(Input web compression sheets with finger system)
5.0M DILO NEEDLE LOOM:
Type DI-LOOM UD-Li S 50 (1999)
Stroke: UP
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0M DILO NEEDLE LOOM:
Type DI-LOOM UD-II i S 50 (1999,)
Stroke: DOWN
Twin Board
Total Needles 90000
Needle Density: 1800 needles /m
Max Gap: mm
Max needled width: 5.0m
RPM: 1500 (Max)
5.0M DILO NEEDLE LOOM 3 (DILOUR):
Type DI-LOUR-II SXBG 50 (1999,)
Stroke: DOWN
Twin Board
Total Needles 160000
Needle Density: 3200 needles /m
Fork needles
Brush conveyor
Max Gap: mm
Max needled width: 5.0m
RPM: 1900 (Max)
FINISHING
Menzel J Box
Menzel Overhead gantry
Menzel 5m metal detection
Sellers 5m cropping/shearing + 12 bag fibre/lint collection (2008) (not been used for several years)
4 head edge and centre fabric slitting
Edge trim - Hepp-Schwamborn (Germany) – Edge shredding with fan
ETF cross cutting
ETF batching roll wind-up (2006)
Fabric measure
ETF cross cutting
ETF take-off rolls
6 x fabric roll transport trucks
Electrical Supply: 440/60-380/50
Delivery: 2025 1st Quater
Aprox Container Required : 25 x 40 ft Container (Estimated) There is a lot of machinery to transport, EXAMPLE- Each ONLY needle loom weighs 20 tonnes.
Dismantling Time: Aprox ¾ weeks in smooth manner…