BRAND NEW COMPLETE CAST FILM PRODUCTION PLANT
BRAND NEW COMPLETE CAST FILM PRODUCTION PLANT
Description
Brand new production plant from china & overseas ,due to post covid & ongoing war impact reputed & famous sold oem brands in India Complete CAST FILM Production Plant for WATER SOLUBLE PVA FILM manufacturing in 1000 mm width x 400-450 Kg/Hr output .
The main raw material of PVA water-soluble film is polyvinyl alcohol. As a concept of environmentally friendly packaging material, PVA water-soluble film is widely used as inner packaging material for water-soluble chemical products in Europe, America, Japan and other countries. For example: pesticides, fertilizers, dyes, detergents, water treatment agents, mineral additives, detergents, concrete additives, chemical reagents for photography and chemical reagents for garden care, etc. It can also be used as rapeseed, plant seed bags, clothing packaging bags , Food and hospital washing bags and other products inside and outside packaging.
Advantages of water-soluble film
New type of environmental protection material, which degrades rapidly and dissolves in water immediately. The dissolved products are water and CO2, and no harmful substances are produced.
Simple and convenient to use, to avoid direct contact with harmful substances; oil-resistant, corrosion-resistant, and anti-static
It has good strength, toughness, plasticity, strong tensile resistance, bonding and heat-sealing performance.
Application scenarios: used for high-end textiles, plastic packaging bags, packaging cushions, and book/paper protective films.
Water-soluble packaging applications
Dye packaging Seed packaging Agricultural packaging Food packaging Chemical packaging Anti-sense ran packaging Textile packaging Anti-static packaging Cement additive packaging
Technical specification & Scope of Supply Item/Machinery wise :
Raw material: PVA [ Poly Vinyl Alchol]
PVA virgin and crushed material
Finished sheet specification:L=1000mm，
Thickness =80-120microns
Max. Output capacity:400-450Kg/h
parallel twin-screw extruder
1 unit
parallel twin-screw extruder
1 unit
Hydraulic screen changer
1 unit
Melt pump
1 unit
Melt flow channel
1 unit
Flow extension molding machine
1 unit
Roller temperature controller
1 unit
Online crusher
1 unit
Cutting edge device
1 unit
Calibrator
1 unit
Haul-off unit
1 unit
Static electricity eliminator
1 unit
Automatic rolling machine
1 unit
control system software
1 unit
Feeding system
1 unit
Single screw-screw extruder
Screw outside diameter
Ф81mm
Screw inside diameter
Ф52.6mm
Screw groove depth
14.2mm
Inside and outside diameter ratio of
screw Do/Di
1.55
Barrel inside diameter
Ф81.9mm
Center distance of twin screw
67.8mm
Gap between rollers
1mm
Gap between roller and barrel
0.45mm
L/D
L/D =40
Screw rotation speed
Max. 300rpm
Screw machine torque grade
T/A3= 8.2N.m/cm3
Main motor power
160KW
Total heating power
60KW
Feeder model
WD-90
Feeder type
Single screw
Screw type
Spiral screw
Screw diameter
90mm
Motor power
2.2KW
Gearbox speed ratio
i=11
Volume of hopper
200L
Material of hopper
SS304
Motor brand
OMCE
Motor power
160KW AC
Motor rotation speed
1480rpm
Motor protection grade
IP54
Cooling fan
Equipped with the separate fan
Inverter
Sweden ABB
Gearbox type
High torque
Speed ratio
i=5
Output rotate speed
Max. 300rpm
Bearings
NSK, SKF
Gear accuracy class
6 level
Gear material
20CrMnTi& 40CrNiMoA
Max torque
5080 N.m
Lubricating pump
1.1KW
3.0㎡
Heating change area
Lubricating oil amount
90L
Lubricating oil type
L-CKC 220#
Screw and core shaft
Screw material
38CrMoAlA
Screw hardness
HV 900~1000
Heat treatment
Nitride
Core shaft material
40CrNiMoA
Core shaft tempering hardness
HB300-350
Connection method
Spline
Barrel
Type
Basic
Material
38CrMoAlA
Hardness
HV 950~1050
L/D
L/D= 4/6
Heating machine
Cast copper for first 2 zones,
cast aluminum heater for other
zones
Cooling for barrel
Motor power
0.55KW
Circulation water tank volume
150L
Water tank material
SS304
Heat exchanger area
4.2㎡
Cooling medium
Deionized water
Brand of magnetic valve
Italian CEME
Highly quality vacuum system
Vacuum pump
Spin-pump vacuum system
Vacuum exhaust
3 units
Vacuum pump power
7.5KW
Ultimate vacuum
≤10Pa
Max. swept volume
300L/S
Running vacuum degree
≤300Pa
Material of vacuum tank
SS304
Vacuum degree display
High precision vacuo scope
and digital instrument
Vacuum unit front attachment
5~10℃
Cooling tank and filtering tank,
customers 5 ~ 10 ℃ cooling
water
2.
parallel twin-screw extruder
Screw outside diameter
Ф51.4mm
Screw inside diameter
Ф33.8mm
Screw groove depth
8.8mm
Inside and outside diameter ratio of
screw Do/Di
1.55
Barrel inside diameter
Ф52mm
Center distance of twin screw
43mm
Gap between rollers
0.4mm
Gap between roller and barrel
0.3mm
L/D
L/D =40
Screw rotation speed
Max 266rpm
Screw machine torque grade
T/A3= 8.0N.m/cm3
Main motor power
37KW
Total heating power
27KW
Feeder model
WD-50
Feeder type
Single screw
Screw type
Spiral screw
Screw diameter
50mm
Motor power
0.75KW
Gearbox speed ratio
i=11
Volume of hopper
100L
Hopper material
SS304
Motor brand
OMEC
Motor power
37KW AC
Motor rotation speed
980rpm
Motor protection grade
IP54
Cooling fan
Equipped with the separate fan
Inverter
Sweden ABB
Gearbox type
High torque
Speed ratio
i=3.75
Output rotate speed
Max 266rpm
Bearings
NSK, SKF
Gear accuracy class
6 level
Gear material
20CrMnTi& 40CrNiMoA
Max torque
1328N.m
Lubricating pump
0.37KW
1.5㎡
Heating change area
Lubricating oil amount
25L
Lubricating oil type
L-CKC 220#
Screw and core shaft
Screw material
38CrMoAlA
Screw hardness
HV 900~1000
Heat treatment
Nitride
Core shaft material
40CrNiMoA
Core shaft tempering hardness
HB266-350
Connection method
Spline
Barrel
Type
Basic
Material
38CrMoAlA
Hardness
HV 950~1050
L/D
L/D=4 or 6
Heating machine
Cast copper for first 2 zones,
cast aluminum heater for other
zones
Cooling for barrel
Motor power
0.55KW
Circulation water tank volume
100L
Water tank material
SS304
Heat exchanger area
1.5㎡
Cooling medium
Deionized water
Brand of magnetic valve
Italian CEME
Structural style Plate type double work
station,automatic network change
Drive
Hydraulic drive, Manual control
Heating
Stainless steel heating rod
Hydraulic equipment
Equipped with Hydraulic station
(highest pressure 16Mpa)
Temperature pressure control
With a temperature and pressure
sensor in front of the net
Specifications 92.6CC
Pump transfer connection
Universal Shaft Connector
Reduced motor
GUOMAO
power of motor
5.5KW
Pressure transducer
The pressure sensor before the
pump is Jeffren, Italy, and the front
and after the pump is XIANDA
T-die brand
JC-TIMES
Adjust method
Manual regulation
T-die structure
High quality steel for T-die
T-die structure
T-type, Clothes hanger type flow
channel
Heating method
Stainless steel heating rod for
heating
Technology
0.03-0.05mm
Overall quenching, channel
surface with hard chrome plated
polishing treatment, layer
thickness of 0.03-0.05mm
Product specification
L=1600mm, δ=80-120μ
Roll cylinder specifications
Ф600×1800mm
Ф400×1800mm
Ф180×1800mm
Ф320×1800mm
First roll: mirror roll Ф 600×
1800mm Second roller: mirror
roller Ф 400×1800mm Roll 2 needs
to be cleaned by IF quenching
alone
Third roller: rubber roller Ф
1801800mm Ф320×1800mm
(including auxiliary cooling roller)
Roller substrate
45 Steel
Roller finish
Ra≤0.025 μm
Ra 0.025 μ m (mirror treatment)
Roller surface hardness
HRC58-62
Chrome thickness
≥0.08mm
Driving mode
Independent transmission
Drive the motor
Invance frequency conversion
motor
Power
4 4KW×2
Servo controller Inovance frequency conversion
controller
Gear box
NORD
The methods of gap adjustable between
rollers
Hydraulic opening and closing,
manual worm gear fine-tuning, with
self-locking function,safety
emergency stop switch,
synchronous control system
Side panel for three rollers
One block of solid steel
Bearings for three rollers
BUT
Calendar type
Horizontal structure
Revolving joint
Water in and out method
Unilateral
Safety action
Equipped with pull switch,
emergency stop
Electrostatic lock edge
1 unit
Cooling medium
Softened purified water
Temperature range
100℃
Room temperature to 80 ℃
Temperature control precision
±1℃
Water pump
Stainless multi- pump
Cooling valve
Pneumatic valve
Control mode
Independent control
With pressure, temperature, water overload alarm function
Online crusher
Membrane special
The air supply goes directly back
to the extruder hopper
Cutting edge device
2 sets, (a set of two knives)
Cut edge knife
Blade structure
Brand
Scantech
Effective width 1270
Specifications Ф160×1800mm
Material
Steel roller
Motor
Inovance frequency conversion
motor
Servo controller Inovance frequency conversion
controller
Gear box
NORD
Transmission power 2.9KW
Speed and the three-roll
synchronization can also be
independent
Static electricity eliminator
One set on both sides
Form
Lon rod type
structural style
Double station flip type,
automatic roll, manual roll
Transmission motor
Frequency conversion control
Control method
Converter motor
Automatic meter (Setable)
AUTONICS
Online tension control
Taiwan brand, roll collection
servo control, small error
accuracy
Tension cone control
Multipoint
Automatic disconnection
1 Set
Air shaft specification
3
2
Inner core 3 inches, 2 pics
Max. winding diameter
500 mm
One 500mm spare expansion
shaft
Operating cabinet
Clothes closet
Operation screen
KUNLUNTONGTAI
PLC
Inovance
Main inverter
Inovance
Three roller haul off controller
Inovance
Relay
JIEDENGBAO
Breaker
CHNT
Breaker
CHNT
Buttons and indication lights
APT
Spiral feeder
1 Unit
Vertical mixing tank (powder)
1 Unit
Mold special tools
1 unit
Extruder cylinder
heating ring
1 unit
Thermo couple
2 unit
Contactor
2 unit
Relay
2 只
2 unit
Mold heating rod
2 unit
Screen changer heating rod
6 unit
- Each power part of the whole line shall be equipped with an emergency stop device, pull
wire switch or emergency stop button
- The chain, synchronous belt, coupling, gear and other transmission structures of the whole
line should be designed with a protective cover to avoid accidental touch
- Protective railings should be designed in the aerial working area, aisles and platforms, and
the design should prevent falling objects from falling in the aerial working area
- Centralized control of the whole line, with panel control on site, including the start and stop Button
- Electrical wiring design is in line with industry standards
- There shall be no exposed wires at the wiring point, and obvious signs or protective devices in the high voltage area
- equipped with the safety linkage device fault diagnosis function
380V/3P/50Hz Three-phase five-wire system
Cooling water:
Water pressure: 2-4Kg/cm²,
Water consumption:
10 ℃-12℃,20m³/h or
20 ℃-30℃,30m³/h
Air pressure:
0.6-0.8Mpa， 1.5m³/h
Pressure 0.6-0.8Mpa, air consumption1.5m³/h.